"Hi, I'm Bill from B&B Supply, PriceGun.com, and I'll be showing you how to load the labels into the Monarch 1130 Price Gun.
I can imagine that because you're watching this video right now, you're probably pretty frustrated and feel like throwing your price gun against the wall. But let's not do that. Just take a deep breath and realize that in the next two minutes I'm going to help you have this thing loaded. For a printable version of these instructions, as well as maintenance tips, please visit our website at www.PriceGun.com.
Let's first start by putting the ink roller into the Monarch 1130. By sliding the black latches back you open the top half of the gun. Fold the ink roller by the stem and slide it onto the post until it clicks into place. Next, we'll prepare our labels, by taking the roll and discarding the labels to where the glue was used to hold it. This is so you don't risk jamming up the machine with the labels that had the adhesive on them. You'll discard about 10 or 12 Monarch 1130 labels. Then pick off about five to six inches of labels so you start with just a strip of backing paper. Next, take hold of and open your Monarch 1130 Price Gun. Make sure the labels are coming off the top of the roll, and click the label roll into place between the two light ray roll holders. Then pull and drape your backing paper over the peel bar and close the gun. Lift the Monarch 1130, and covering the white roller, feed the backing paper into the opening. When the paper meets resistance from the feed wheel keep your hand on the paper, and with your other hand, begin clicking the hand trigger. The backing paper should start to tighten up, and printed Monarch 1130 labels should start coming out the top of the gun. Finally, tear off and discard the backing paper.
I hope this video has helped you learn how to load your Monarch Price Gun. If you have any further questions, please give us a call 1-800-346-7820, or visit our website at PriceGun.com."